Crosswalk
CMMC to NIST Crosswalk
Each CMMC practice with the NIST SP 800-171 Rev 2 requirement it is built on, the Rev 3 counterpart, the SP 800-53 Rev 4 and Rev 5 controls behind it and, for Level 3, the SP 800-172 requirement and its Rev 3 successor. Open any number to read it.
Filters1 on
12 practices · CM — Configuration Management · To 800-53 Rev 5 · Clear
Showing one domain. The whole table, 149 practices in 14 domains on one page, and its downloads are for members.
Free with an account. Create a free account or sign in.
About these relationships
Mappings are the guides' key references and NIST's published relationships; a practice with no mapping yet shows a dash. Every cell comes from an official NIST or DoD table: Rev 3 entries from NIST's change analyses (a withdrawn requirement leads to the requirement NIST says replaces it), Rev 4 controls from SP 800-171 Rev 2 Appendix D, and each Rev 5 control carries the path that reached it.
Rev 5 paths: D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison; S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL); C SP 800-172 (Feb 2021) Appendix C. NIST also names this Rev 3 requirement as the successor of other withdrawn requirements: open “How these were reached” under the Rev 5 controls for which, in NIST's words.
Spot an error? Email [email protected] with the practice number and the official document you are reading.
- CM.L2-3.4.1System Baselining
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 54
CM-2DSCM-6DCM-8DCM-8(1)DHow these were reachedHide how these were reached
- CM-2 · Baseline Configuration
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-2 → 800-53 Rev 5 CM-2
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.01 → 800-53 Rev 5 CM-2NIST: 03.04.01 also: SP 800-172 (Feb 2021) 3.4.1e addressed by (SP 800-171 Rev 3)
- CM-6 · Configuration Settings
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-6 → 800-53 Rev 5 CM-6
- CM-8 · System Component Inventory
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-8 → 800-53 Rev 5 CM-8
- CM-8(1) · System Component Inventory | Updates During Installation and Removal
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-8 (1) → 800-53 Rev 5 CM-8(1)
- CM-2 · Baseline Configuration
- CM.L2-3.4.2Security Configuration Enforcement
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 54
CM-2DCM-6DSCM-8DCM-8(1)DHow these were reachedHide how these were reached
- CM-2 · Baseline Configuration
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-2 → 800-53 Rev 5 CM-2
- CM-6 · Configuration Settings
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-6 → 800-53 Rev 5 CM-6
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.02 → 800-53 Rev 5 CM-6NIST: 03.04.02 also: 3.13.7 addressed by
- CM-8 · System Component Inventory
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-8 → 800-53 Rev 5 CM-8
- CM-8(1) · System Component Inventory | Updates During Installation and Removal
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-8 (1) → 800-53 Rev 5 CM-8(1)
- CM-2 · Baseline Configuration
- CM.L2-3.4.3System Change Management
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 51
CM-3DSHow these were reachedHide how these were reached
- CM-3 · Configuration Change Control
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-3 → 800-53 Rev 5 CM-3
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.03 → 800-53 Rev 5 CM-3NIST: 03.04.03 also: SP 800-172 (Feb 2021) 3.4.1e addressed by (SP 800-171 Rev 3)
- CM-3 · Configuration Change Control
- CM.L2-3.4.4Security Impact Analysis
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 52
CM-4DSCM-4(2)SHow these were reachedHide how these were reached
- CM-4 · Impact Analyses
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-4 → 800-53 Rev 5 CM-4
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.04 → 800-53 Rev 5 CM-4
- CM-4(2) · Impact Analyses | Verification of Controls
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.04 → 800-53 Rev 5 CM-4(2)
- CM-4 · Impact Analyses
- CM.L2-3.4.5Access Restrictions for Change
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 51
CM-5DSHow these were reachedHide how these were reached
- CM-5 · Access Restrictions for Change
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-5 → 800-53 Rev 5 CM-5
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.05 → 800-53 Rev 5 CM-5
- CM-5 · Access Restrictions for Change
- CM.L2-3.4.6Least Functionality
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 52
CM-7DSCM-7(1)SHow these were reachedHide how these were reached
- CM-7 · Least Functionality
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-7 → 800-53 Rev 5 CM-7
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.06 → 800-53 Rev 5 CM-7NIST: 03.04.06 also: 3.4.7 incorporated into; 3.13.7 addressed by
- CM-7(1) · Least Functionality | Periodic Review
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.06 → 800-53 Rev 5 CM-7(1)NIST: 03.04.06 also: 3.4.7 incorporated into; 3.13.7 addressed by
- CM-7 · Least Functionality
- CM.L2-3.4.7Nonessential Functionality
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 54
CM-7SCM-7(1)DSCM-7(2)DCM-7(5)SHow these were reachedHide how these were reached
- CM-7 · Least Functionality
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.06 → 800-53 Rev 5 CM-7NIST: 03.04.06 also: 3.13.7 addressed by
- CM-7(1) · Least Functionality | Periodic Review
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-7 (1) → 800-53 Rev 5 CM-7(1)
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.06 → 800-53 Rev 5 CM-7(1)NIST: 03.04.06 also: 3.13.7 addressed by
- CM-7(2) · Least Functionality | Prevent Program Execution
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-7 (2) → 800-53 Rev 5 CM-7(2)
- CM-7(5) · Least Functionality | Authorized Software - Allow-by-exception
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.08 → 800-53 Rev 5 CM-7(5)NIST: 03.04.08 also: 3.4.9 addressed by
- CM-7 · Least Functionality
- CM.L2-3.4.8Application Execution Policy
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 52
CM-7(4)DCM-7(5)DSHow these were reachedHide how these were reached
- CM-7(4) · Least Functionality | Unauthorized Software - Deny-by-exception
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-7 (4) → 800-53 Rev 5 CM-7(4)
- CM-7(5) · Least Functionality | Authorized Software - Allow-by-exception
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-7 (5) → 800-53 Rev 5 CM-7(5)
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.08 → 800-53 Rev 5 CM-7(5)NIST: 03.04.08 also: 3.4.7 incorporated into; 3.4.9 addressed by
- CM-7(4) · Least Functionality | Unauthorized Software - Deny-by-exception
- CM.L2-3.4.9User-Installed Software
NIST SP 800-171 Rev 21
NIST SP 800-53 Rev 511
AC-6SAC-6(1)SAC-6(2)SAC-6(5)SAC-6(7)SAC-6(9)SAC-6(10)SAU-9(4)SCA-7SCM-7(5)SCM-11DHow these were reachedHide how these were reached
- AC-6 · Least Privilege
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.01.05 → 800-53 Rev 5 AC-6NIST: 03.01.05 also: 3.13.3 addressed by
- AC-6(1) · Least Privilege | Authorize Access to Security Functions
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.01.05 → 800-53 Rev 5 AC-6(1)NIST: 03.01.05 also: 3.13.3 addressed by
- AC-6(2) · Least Privilege | Non-privileged Access for Nonsecurity Functions
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.01.06 → 800-53 Rev 5 AC-6(2)NIST: 03.01.06 also: 3.13.3 addressed by
- AC-6(5) · Least Privilege | Privileged Accounts
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.01.06 → 800-53 Rev 5 AC-6(5)NIST: 03.01.06 also: 3.13.3 addressed by
- AC-6(7) · Least Privilege | Review of User Privileges
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.01.05 → 800-53 Rev 5 AC-6(7)NIST: 03.01.05 also: 3.13.3 addressed by
- AC-6(9) · Least Privilege | Log Use of Privileged Functions
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.01.07 → 800-53 Rev 5 AC-6(9)NIST: 03.01.07 also: 3.13.3 addressed by
- AC-6(10) · Least Privilege | Prohibit Non-privileged Users from Executing Privileged Functions
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.01.07 → 800-53 Rev 5 AC-6(10)NIST: 03.01.07 also: 3.13.3 addressed by
- AU-9(4) · Protection of Audit Information | Access by Subset of Privileged Users
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.01.05 → 800-53 Rev 5 AU-9(4)NIST: 03.01.05 also: 3.13.3 addressed by
- CA-7 · Continuous Monitoring
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.12.03 → 800-53 Rev 5 CA-7NIST: 03.12.03 also: SP 800-172 (Feb 2021) 3.11.5e, 3.11.6e addressed by (SP 800-171 Rev 3)
- CM-7(5) · Least Functionality | Authorized Software - Allow-by-exception
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.08 → 800-53 Rev 5 CM-7(5)NIST: 03.04.08 also: 3.4.7 incorporated into
- CM-11 · User-installed Software
- D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison · via 800-53 Rev 4 CM-11 → 800-53 Rev 5 CM-11
- AC-6 · Least Privilege
- CM.L3-3.4.1eAuthoritative Repository
NIST SP 800-171 Rev 2—
—NIST SP 800-53 Rev 59
CM-2CSCM-3CSCM-8CSCM-8(1)SCM-8(7)SSI-14(1)CSSR-4SSR-4(4)SSR-11SHow these were reachedHide how these were reached
- CM-2 · Baseline Configuration
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.01 → 800-53 Rev 5 CM-2
- C SP 800-172 (Feb 2021) Appendix C
- CM-3 · Configuration Change Control
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.03 → 800-53 Rev 5 CM-3
- C SP 800-172 (Feb 2021) Appendix C
- CM-8 · System Component Inventory
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.10 → 800-53 Rev 5 CM-8
- C SP 800-172 (Feb 2021) Appendix C
- CM-8(1) · System Component Inventory | Updates During Installation and Removal
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.10 → 800-53 Rev 5 CM-8(1)
- CM-8(7) · System Component Inventory | Centralized Repository
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.08E → 800-53 Rev 5 CM-8(7)
- SI-14(1) · Non-persistence | Refresh from Trusted Sources
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.14.04E → 800-53 Rev 5 SI-14(1)
- C SP 800-172 (Feb 2021) Appendix C
- SR-4 · Provenance
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.17.04E → 800-53 Rev 5 SR-4
- SR-4(4) · Provenance | Supply Chain Integrity - Pedigree
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.17.05E → 800-53 Rev 5 SR-4(4)
- SR-11 · Component Authenticity
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.17.03E → 800-53 Rev 5 SR-11NIST: 03.17.03E also: 3.14.7e addressed by
- CM-2 · Baseline Configuration
- CM.L3-3.4.2eAutomated Detection & Remediation
NIST SP 800-171 Rev 2—
—NIST SP 800-53 Rev 57
CM-2CCM-3CCM-3(5)CCM-3(8)CCM-6(1)SCM-6(2)SCM-8(3)SHow these were reachedHide how these were reached
- CM-2 · Baseline Configuration
- C SP 800-172 (Feb 2021) Appendix C
- CM-3 · Configuration Change Control
- C SP 800-172 (Feb 2021) Appendix C
- CM-3(5) · Configuration Change Control | Automated Security Response
- C SP 800-172 (Feb 2021) Appendix C
- CM-3(8) · Configuration Change Control | Prevent or Restrict Configuration Changes
- C SP 800-172 (Feb 2021) Appendix C
- CM-6(1) · Configuration Settings | Automated Management, Application, and Verification
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.02E → 800-53 Rev 5 CM-6(1)
- CM-6(2) · Configuration Settings | Respond to Unauthorized Changes
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.02E → 800-53 Rev 5 CM-6(2)
- CM-8(3) · System Component Inventory | Automated Unauthorized Component Detection
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.02E → 800-53 Rev 5 CM-8(3)
- CM-2 · Baseline Configuration
- CM.L3-3.4.3eAutomated Inventory
NIST SP 800-171 Rev 2—
—NIST SP 800-53 Rev 52
CM-2(2)CCM-8(2)CSHow these were reachedHide how these were reached
- CM-2(2) · Baseline Configuration | Automation Support for Accuracy and Currency
- C SP 800-172 (Feb 2021) Appendix C
- CM-8(2) · System Component Inventory | Automated Maintenance
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.03E → 800-53 Rev 5 CM-8(2)
- C SP 800-172 (Feb 2021) Appendix C
- CM-2(2) · Baseline Configuration | Automation Support for Accuracy and Currency