Skip to content

Crosswalk

CMMC to NIST Crosswalk

Each CMMC practice with the NIST SP 800-171 Rev 2 requirement it is built on, the Rev 3 counterpart, the SP 800-53 Rev 4 and Rev 5 controls behind it and, for Level 3, the SP 800-172 requirement and its Rev 3 successor. Open any number to read it.

Filters1 on

12 practices · CM — Configuration Management · 800-171 Rev 2 → Rev 3 · Clear

Showing one domain. The whole table, 149 practices in 14 domains on one page, and its downloads are for members.

Free with an account. Create a free account or sign in.

About these relationships

Mappings are the guides' key references and NIST's published relationships; a practice with no mapping yet shows a dash. Every cell comes from an official NIST or DoD table: Rev 3 entries from NIST's change analyses (a withdrawn requirement leads to the requirement NIST says replaces it), Rev 4 controls from SP 800-171 Rev 2 Appendix D, and each Rev 5 control carries the path that reached it.

Rev 5 paths: D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison; S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL); C SP 800-172 (Feb 2021) Appendix C. NIST also names this Rev 3 requirement as the successor of other withdrawn requirements: open “How these were reached” under the Rev 5 controls for which, in NIST's words.

Spot an error? Email [email protected] with the practice number and the official document you are reading.

  1. CM.L2-3.4.1System Baselining
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 31
  2. CM.L2-3.4.2Security Configuration Enforcement
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 31
  3. CM.L2-3.4.3System Change Management
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 31
  4. CM.L2-3.4.4Security Impact Analysis
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 31
  5. CM.L2-3.4.5Access Restrictions for Change
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 31
  6. CM.L2-3.4.6Least Functionality
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 31
  7. CM.L2-3.4.7Nonessential Functionality
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 32
    03.04.0603.04.07 withdrawn; incorporated into03.04.0803.04.07 withdrawn; incorporated into
  8. CM.L2-3.4.8Application Execution Policy
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 31
  9. CM.L2-3.4.9User-Installed Software
    NIST SP 800-171 Rev 21
    NIST SP 800-171 Rev 35
    03.01.0503.04.09 withdrawn; addressed by03.01.0603.04.09 withdrawn; addressed by03.01.0703.04.09 withdrawn; addressed by03.04.0803.04.09 withdrawn; addressed by03.12.0303.04.09 withdrawn; addressed by
  10. CM.L3-3.4.1eAuthoritative Repository
    NIST SP 800-171 Rev 2—
    —
    NIST SP 800-171 Rev 3—
    —
  11. CM.L3-3.4.2eAutomated Detection & Remediation
    NIST SP 800-171 Rev 2—
    —
    NIST SP 800-171 Rev 3—
    —
  12. CM.L3-3.4.3eAutomated Inventory
    NIST SP 800-171 Rev 2—
    —
    NIST SP 800-171 Rev 3—
    —