Crosswalk
CMMC to NIST Crosswalk
Each CMMC practice with the NIST SP 800-171 Rev 2 requirement it is built on, the Rev 3 counterpart, the SP 800-53 Rev 4 and Rev 5 controls behind it and, for Level 3, the SP 800-172 requirement and its Rev 3 successor. Open any number to read it.
Filters2 on
3 practices · Level 3 · CM — Configuration Management · To 800-53 Rev 5 · Clear
Showing one domain. The whole table, 149 practices in 14 domains on one page, and its downloads are for members.
Free with an account. Create a free account or sign in.
About these relationships
Mappings are the guides' key references and NIST's published relationships; a practice with no mapping yet shows a dash. Every cell comes from an official NIST or DoD table: Rev 3 entries from NIST's change analyses (a withdrawn requirement leads to the requirement NIST says replaces it), Rev 4 controls from SP 800-171 Rev 2 Appendix D, and each Rev 5 control carries the path that reached it.
Rev 5 paths: D SP 800-171 Rev 2 Appendix D → SP 800-53 Rev 4 control → NIST's Rev 4 → Rev 5 comparison; S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL); C SP 800-172 (Feb 2021) Appendix C. NIST also names this Rev 3 requirement as the successor of other withdrawn requirements: open “How these were reached” under the Rev 5 controls for which, in NIST's words.
Spot an error? Email [email protected] with the practice number and the official document you are reading.
- CM.L3-3.4.1eAuthoritative Repository
NIST SP 800-171 Rev 2—
—NIST SP 800-53 Rev 59
CM-2CSCM-3CSCM-8CSCM-8(1)SCM-8(7)SSI-14(1)CSSR-4SSR-4(4)SSR-11SHow these were reachedHide how these were reached
- CM-2 · Baseline Configuration
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.01 → 800-53 Rev 5 CM-2
- C SP 800-172 (Feb 2021) Appendix C
- CM-3 · Configuration Change Control
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.03 → 800-53 Rev 5 CM-3
- C SP 800-172 (Feb 2021) Appendix C
- CM-8 · System Component Inventory
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.10 → 800-53 Rev 5 CM-8
- C SP 800-172 (Feb 2021) Appendix C
- CM-8(1) · System Component Inventory | Updates During Installation and Removal
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-171 Rev 3 03.04.10 → 800-53 Rev 5 CM-8(1)
- CM-8(7) · System Component Inventory | Centralized Repository
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.08E → 800-53 Rev 5 CM-8(7)
- SI-14(1) · Non-persistence | Refresh from Trusted Sources
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.14.04E → 800-53 Rev 5 SI-14(1)
- C SP 800-172 (Feb 2021) Appendix C
- SR-4 · Provenance
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.17.04E → 800-53 Rev 5 SR-4
- SR-4(4) · Provenance | Supply Chain Integrity - Pedigree
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.17.05E → 800-53 Rev 5 SR-4(4)
- SR-11 · Component Authenticity
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.17.03E → 800-53 Rev 5 SR-11NIST: 03.17.03E also: 3.14.7e addressed by
- CM-2 · Baseline Configuration
- CM.L3-3.4.2eAutomated Detection & Remediation
NIST SP 800-171 Rev 2—
—NIST SP 800-53 Rev 57
CM-2CCM-3CCM-3(5)CCM-3(8)CCM-6(1)SCM-6(2)SCM-8(3)SHow these were reachedHide how these were reached
- CM-2 · Baseline Configuration
- C SP 800-172 (Feb 2021) Appendix C
- CM-3 · Configuration Change Control
- C SP 800-172 (Feb 2021) Appendix C
- CM-3(5) · Configuration Change Control | Automated Security Response
- C SP 800-172 (Feb 2021) Appendix C
- CM-3(8) · Configuration Change Control | Prevent or Restrict Configuration Changes
- C SP 800-172 (Feb 2021) Appendix C
- CM-6(1) · Configuration Settings | Automated Management, Application, and Verification
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.02E → 800-53 Rev 5 CM-6(1)
- CM-6(2) · Configuration Settings | Respond to Unauthorized Changes
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.02E → 800-53 Rev 5 CM-6(2)
- CM-8(3) · System Component Inventory | Automated Unauthorized Component Detection
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.02E → 800-53 Rev 5 CM-8(3)
- CM-2 · Baseline Configuration
- CM.L3-3.4.3eAutomated Inventory
NIST SP 800-171 Rev 2—
—NIST SP 800-53 Rev 52
CM-2(2)CCM-8(2)CSHow these were reachedHide how these were reached
- CM-2(2) · Baseline Configuration | Automation Support for Accuracy and Currency
- C SP 800-172 (Feb 2021) Appendix C
- CM-8(2) · System Component Inventory | Automated Maintenance
- S source control of the SP 800-171 Rev 3 or SP 800-172 Rev 3 requirement (NIST OSCAL) · via 800-172 Rev 3 03.04.03E → 800-53 Rev 5 CM-8(2)
- C SP 800-172 (Feb 2021) Appendix C
- CM-2(2) · Baseline Configuration | Automation Support for Accuracy and Currency